Archive for the ‘Energy’ Category

The greenhouse gas that saved the world

Tuesday, August 18th, 2009
 

The greenhouse gasChemistry researchers uncover why the archean world was not frozen solid

When Planet Earth was just cooling down from its fiery creation, the sun was faint and young. So faint that it should not have been able to keep the oceans of earth from freezing. But fortunately for the creation of life, water was kept liquid on our young planet. For years scientists have debated what could have kept earth warm enough to prevent the oceans from freezing solid. Now a team of researchers from Tokyo Institute of Technology and University of Copenhagen’s Department of Chemistry have coaxed an explanation out of ancient rocks, as reported in this week’s issue of PNAS

A perfect greenhouse gas

- “The young sun was approximately 30 percent weaker than it is now, and the only way to prevent earth from turning into a massive snowball was a healthy helping of greenhouse gas,” Associate Professor Matthew S. Johnson of the Department of Chemistry explains. And he has found the most likely candidate for an archean atmospheric blanket. Carbonyl Sulphide: A product of the sulphur disgorged during millennia of volcanic activity.

- “Carbonyl Sulphide is and was the perfect greenhouse gas. Much better than Carbon Dioxide. We estimate that a blanket of Carbonyl Sulphate would have provided about 30 percent extra energy to the surface of the planet. And that would have compensated for what was lacking from the sun”, says Professor Johnson.

Strange distribution

To discover what could have helped the faint young sun warm early earth, Professor Johnson and his colleagues in Tokyo examined the ratio of sulphur isotopes in ancient rocks. And what they saw was a strange signal; A mix of isotopes that couldn’t very well have come from geological processes.

- “There is really no process in the rocky mantle of earth that would explain this distribution of isotopes. You would need something happening in the atmosphere,” says Johnson. The question was what. Painstaking experimentation helped them find a likely atmospheric process. By irradiating sulphur dioxide with different wavelengths of sunlight, they observed that sunlight passing through Carbonyl Sulphide gave them the wavelengths that produced the weird isotope mix.

- “Shielding by Carbonyl Sulphide is really a pretty obvious candidate once you think about it, but until we looked, everyone had missed it,” says Professor Johnson, and he continues.

- “What we found is really an archaic analogue to the current ozone layer. A layer that protects us from ultraviolet radiation. But unlike ozone, Carbonyl Sulphide would also have kept the planet warm. The only problem is: It didn’t stay warm”.

Life caused ice-age

As life emerged on earth it produced increasing amounts of oxygen. With an increasingly oxidizing atmosphere, the sulphur emitted by volcanoes was no longer converted to Carbonyl Sulphide. Instead it got converted to sulphate aerosols: A powerful climate coolant. Johnson and his co-workers created a Computer model of the ancient atmosphere. And the models in conjunction with laboratory experiments suggest that the fall in levels of Carbonyl Sulphide and rise of sulphate aerosols taken together would have been responsible for creating snowball earth, the planetwide ice-age hypothesised to have taken place near the end of the Archean eon 2500 million years ago. And the implications to Johnson are alarming:

- “Our research indicates that the distribution and composition of atmospheric gasses swung the planet from a state of life supporting warmth to a planet-wide ice-age spanning millions of years. I can think of no better reason to be extremely cautious about the amounts of greenhouse gasses we are currently emitting to the atmosphere”.

 

Source: University of Copenhagen

LASER LIGHT TECHNOLOGY CREATES NEW FORMS OF METAL

Monday, July 20th, 2009

AFOSR-funded researchers at the University of Rochester are using laser light technology that will help the military create new forms of metal that may guide, attract and repel liquids and cool small electronic devices.

Dr. Chunlei GuoDr. Chunlei Guo and his team of researchers for the project discovered a way to transform a shiny piece of metal into one that is pitch black, not by paint, but by using incredibly intense bursts of laser light. The black metal created, absorbs all radiation that shines upon it.

“With the creation of the black metal, an entirely new class of material becomes available to us, which may open up a whole new horizon for various applications,” said Guo.

“To do this, we looked at the reverse process of light absorption or light radiation and transformed the incandescent lamp into a bulb that glows twice as brightly as a regular light source, while consuming the same amount of energy,” he said.

The key to creating this super-filament is an ultra-brief, ultra-intense beam of light called a femtosecond laser pulse. The laser burst lasts only a few quadrillionths of a second. That intense blast forces the surface of the metal to form nano-structures and micro-structures that dramatically alter how efficiently light can radiate from the filament.

In addition to increasing the brightness of a bulb, Guo’s process can be used to tune the color of the light as well. Last year, his team used a similar process to change the color of nearly any metal to blue, gold, gray, in addition to the black. They controlled the size and shape of the nano-structures — and thus what colors of light those structures absorb and radiate — to change the amount of each wavelength of light the filament radiates.

In addition to this research, Guo and his team have been working on creating technology that may enable the Air Force to create an additional kind of metal. They are able to do this by using the femtosecond laser once again to alter the surface of metal and create unique nano- and micro-scale structures on the metal.

“During its brief burst, the laser unleashes as much power as the entire electric grid of North America does, all focused onto a spot the size of a needle,” said Guo.

The unique nano-structures which are created from the laser affect the way liquid molecules interact with metal molecules. The liquid spreads out over the metal because the nano-structures attach themselves to the liquid’s molecules more readily than the liquid’s molecules bond to each other. The end result is the formation of a new kind of metal that can cool the plane’s electronic brain and heat pumps and allow the craft to retain dominance over any enemy that is also in flight.

Currently, the researchers need only about half an hour to change the surface of metal that is approximately the size of a quarter. Nevertheless, their next goal is to make the metal even more quickly so they can meet the ever increasing demands of warfighting.

Source: Air Force Office of Scientific Research.

International Bioenergy Days

Friday, June 19th, 2009

Event date: 28-30 September 2009

Location: West Sweden Trollhättan-Lidköping 

 

 

Concrete applications and solutions in the field of bioenergy concentrating on three main areas:

  • Biofules for vehicles
  • Bioenergy for heating and electricity
  • Politics and society

The programme includes study visits to established examples of applications.

 

 

 

More information about the event

Bioelectricity promises more `miles per acre` than ethanol

Thursday, May 14th, 2009

BioelectricityUsing biofuel crops such as corn or switchgrass to generate electricity for running battery-powered vehicles is a far more efficient way of producing energy than making ethanol with them, according to Stanford researchers.

Compared to ethanol used for internal combustion engines, bioelectricity used for battery-powered vehicles would deliver an average of 80 percent more miles of transportation per acre of crops while also providing double the greenhouse gas offsets to mitigate climate change, the researchers said.

They performed a “life-cycle” analysis of both bioelectricity and ethanol technologies, taking into account not only the energy produced by each technology but also the energy consumed in producing the vehicles and fuels. For the analysis, they used publicly available data on vehicle efficiencies from the U.S. Environmental Protection Agency and other organizations. They sought to answer the specific question, “How can we maximize our ‘miles per acre’ from biomass?”

“It’s a relatively obvious question once you ask it, but nobody had really asked it before,” said Chris Field, professor of biology and of environmental Earth system science and a co-author of a paper describing the research, published in the May 7 online edition of Science magazine. “The kinds of motivations that have driven people to think about developing ethanol as a vehicle fuel have been somewhat different from those that have been motivating people to think about battery electric vehicles, but the overlap is in the area of maximizing efficiency and minimizing adverse impacts on climate.”

Bioelectricity was the clear winner in the transportation-miles-per-acre comparison, regardless of whether the energy was produced from corn or from switchgrass. (Both plants are usable for ethanol production, although cellulosic ethanol—which can be made from switchgrass—is more efficient to produce than corn ethanol.) For example, a small SUV powered by bioelectricity could travel nearly 15,000 miles on the net energy produced from an acre of switchgrass while a comparable internal combustion vehicle could travel only about 8,000 miles.

Field, who is also director of the Carnegie Institution’s Department of Global Ecology and a senior fellow at Stanford’s Woods Institute for the Environment, is part of a research team that includes co-author David Lobell, senior researcher at Stanford’s Program on Food Security and the Environment, and lead author Elliott Campbell, assistant professor of engineering at the University of California-Merced.

“The internal combustion engine just isn’t very efficient, especially when compared to electric vehicles,” Campbell said. “Even the best ethanol-producing technologies with hybrid vehicles aren’t enough to overcome this.”

The researchers found that bioelectricity and ethanol also differed in their potential impact on climate change. “Some approaches to bioenergy can make climate change worse, but other limited approaches can help fight climate change,” says Campbell. “For these beneficial approaches, we could do more to fight climate change by making electricity than making ethanol.”

The energy from an acre of switchgrass used to power an electric vehicle would prevent or offset the release of up to 10 tons of carbon dioxide per acre, relative to a similar-sized gasoline-powered car. Across vehicle types and different crops, this offset averages more than 100 percent larger for the bioelectricity than for the ethanol pathway. Bioelectricity also offers more possibilities for reducing greenhouse gas emissions through measures such as carbon capture and sequestration, which could be implemented at biomass power stations but not individual internal combustion vehicles.

While the results of the study clearly favor bioelectricity over ethanol, the researchers caution that the issues facing society in choosing an energy strategy are complex. “We found that converting biomass to electricity rather than ethanol makes the most sense for two policy-relevant issues: transportation and climate,” Lobell said. “But we also need to compare these options for other issues like water consumption, air pollution and economic costs.”

Biofuels such as ethanol offer an alternative to petroleum for powering cars, but growing energy crops to produce them can compete with food crops for farmland, and clearing forests to expand farmland will aggravate the climate change problem.

The carbon impact of those types of changes will have to be part of the life-cycle analyses assessing the full “carbon intensity” of a fuel that will be required under a regulation adopted by the California Air Resources Board on April 23, 2009. The regulation mandates that the overall carbon content of the mix of fuels each manufacturer sells in the state must be reduced 10 percent by 2020. In assessing the true carbon intensity of a fuel, the indirect effects of manufacturing the fuel must be included. For biofuels, this includes the impact of land-use change.

“There is a big strategic decision our country and others are making: whether to encourage development of vehicles that run on ethanol or electricity,” Campbell said. “Studies like ours could be used to ensure that the alternative energy pathways we chose will provide the most transportation energy and the least climate change impacts.”

This research was funded through a grant from the Stanford University Global Climate and Energy Project, with additional support from the Stanford University Program on Food Security and the Environment, UC-Merced, the Carnegie Institution for Science and a NASA New Investigator Grant.

By Lou Bergeron

Renewable Energy in the Urban Environment

Sunday, April 26th, 2009

 Event date: 7-11 September 2009

 

 

 Location: Berlin, Germany

 

 

 Organizer: Green Dragon Energy

 

 

 Topic: Renewable energy

 

 

 This 5-day seminar in Berlin will explore the role of renewable energy in the urban and semi-urban environment. Germany is the world’s renewable energy leader – 5% of its exports are in the field of energy technology. The seminar will include numerous visits to renewable energy installations in Berlin – PV systems, solar thermal systems, heat pumps, bioenergy plants, low-energy and passive solar buildings.

 

 

 More information about the event

World Bioenergy & Clean Vehicles and Fuels

Tuesday, April 7th, 2009

 Event date: 16-18 September 2009

 

 

 Location: Stockholm, Sweden

 

 

 Organizer: Swedish Energy Agency

 

 

 Topic: Bioenergy

 

 

 World Bioenergy – Clean Vehicles & Fuels 2009 will be held in Stockholm as part of Sweden’s EU-Presidency. As such it promises to be a truly unique affair. The combination of World Bioenergy with Clean Vehicles & Fuels ensures an exceptional event.

Consisting of an integrated international conference, excursion and tradeshow programme the event is unlike any other. It is focused on the practical implementation of bioenergy systems and sustainable transport solutions. It covers the whole chain, from policy making right through to technology roll-out and systems evaluation.

 

 

 More information about the event